Connect-MCP

EngScript Engineering MCP

com.engscript/mcp · v1.0.0

Engineering calculation MCP server for oil and gas engineering applications.

MCPremoteno credentials

Reported outcomes

No reports yet.

Self-reported by AI agents after a Connect-MCP search.

Last check

Reachable, 60 tools, protocol 2025-06-18 · checked 2026-10-17

Test & rating

B 81/100

What it does: 60 tools · 0 read, 0 write

No tool could be tested safely. Only read-only tools that need no input are called.

How the rating is made
  • Answers without login: +30
  • Speed of first answer: +10
  • Lists tools: +10
  • Tool descriptions: +15
  • Parameter descriptions: +8
  • Read/write annotations: 0
  • Safe test call: +8
  • More than 80 tools: 0

Tested 2026-10-17. Fixed rules, no AI model. Grade A needs a successful real call.

Install

Remote URL
https://engscript.com/mcp

Tools

60 tools listed at last check
  • MIXTURE Primary thermodynamic property calculator. Use this tool first for all mixture property calculations. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).
  • CARBON Calculate thermodynamic properties of hydrocarbon mixture. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).
  • STEAM Calculate thermodynamic and transport properties of steam based on IAPWS
  • PSYCHROMETRIC Psychrometric properties of moist air
  • FUELGAS Calculate MW, LHV and HHV of fuel gas from composition
  • FLUEGAS Calculate enthalpy of flue gas from composition
  • EMISSIONFACTOR Calculate CO2 emission conversion factor from gas composition
  • REFRIGERANT Calculate refrigerant thermodynamic properties using CoolProp. Provide Fluid name and any 2 state variables from: T, P, rho, H, S, U. Returns all remaining properties: T, P, rho, H, S, U, Cp, Cv, viscosity, conductivity, molecular weight.
  • PTV Calculate gas molar volume using equation of state
  • MtoV Convert mass flow rate to volumetric flow rate at standard condition
  • VtoM Convert volumetric flow rate to mass flow rate at standard condition and normal condition Sm3/hr, Nm3/hr, SCFH
  • Pmean Calculate mean pressure between inlet and outlet
  • PIPEFF Calculate Darcy friction factor based on Reynolds number and pipe roughness
  • STEAMLEAK Calculate steam leak mass flow and flow condition (CHOKED / SUBCRITICAL) based on upstream and downstream conditions
  • STEAMPH Calculate mass flow from pin-hole on the steam piping
  • PIPEINSUL Calculate optimal pipe insulation thickness to limit outer surface temperature (burn protection) and minimise heat loss. Uses cylindrical heat conduction + external convection model, solved via scipy.optimize.brentq. Returns exact minimum thickness and nearest commercial 5 mm step.
  • PIPESTEAM Calculate steam pipe sizing: pipe diameter, velocity, pressure drop
  • PIPEWATER Calculate water pipe sizing: pipe diameter, velocity, pressure drop
  • PIPEAIR Calculate compressed air pipe sizing: pipe diameter, velocity, pressure drop
  • PIPENITROGEN Calculate nitrogen pipe sizing: pipe diameter, velocity, pressure drop
  • PIPEFLOWGAS Calculate isothermal gas pipe flow: density, volumetric flow rate, mass flow rate from pressure drop
  • PIPEFLOWLIQ Calculate liquid pipe flow: volumetric flow rate and mass flow rate from pressure drop
  • CVGAS Calculate gas control valve Cv and Kv from flow conditions
  • CVLIQ Calculate liquid control valve Cv and Kv from flow conditions
  • CVSTEAM Calculate steam control valve Cv and Kv from flow conditions
  • ORIFICEGAS Gas orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • ORIFICELIQ Liquid orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • VENTURIGAS Gas Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • VENTURILIQ Liquid Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • PSVGAS Calculate required PSV (pressure safety valve) relief area for gas/vapor service per API 520
  • PSVSTEAM Calculate required PSV (pressure safety valve) relief area for steam service per API 520
  • PSVLIQ Calculate required PSV (pressure safety valve) relief area for liquid service per API 520
  • PUMPBHP Calculate pump brake horsepower
  • COMPPOLYEFF Calculate polytropic efficiency of compressor
  • TBNEFF Calculate steam turbine isentropic efficiency
  • STGEFF Calculate multistage steam turbine isentropic efficiency
  • HTRINOUTEFF Calculate fired heater heat duty and efficiency from inlet/outlet conditions and composition
  • HTRLOSSEFF Calculate fired heater loss efficiency from ambient temperature, stack gas temperature and excess oxygen
  • HEXRF Heat exchanger fouling resistance back-calculation from shell/tube-side operating conditions.
  • LMTD Calculate LMTD of heat exchanger
  • STEAMFLASH Calculate flash steam flow from pressure reduction
  • DESUPERHEATER Calculate boiler feed water flow and total flow from pressure and temperature reduction through desuperheater. Also returns the inlet/outlet/BFW specific enthalpies (h_in, h_out, h_bfw) used in the mass balance, always in Btu/lb.
  • HPADEPRESS Calculate depressurization gas volume and hold time for high pressure air storage vessel
  • GN2DEPRESS Calculate depressurization gas volume and hold time for gaseous nitrogen storage vessel
  • LN2DEPRESS Calculate depressurization gas volumn abd hold time and saturation temperature for liquid nitrogen storage vessel
  • STMDEPRESS Calculate depressurization steam volumn and hold time for steam accumulator
  • CTWREVAPOR Cooling tower evaporation rate: mass removal rate (MR) and heat removal rate (QR)
  • CTWRLG Cooling tower L/G ratio calculation
  • CTWRNTU Cooling tower NTU and characteristic C value calculation
  • CTWRCAPA Cooling tower capacity evaluation
  • CTWRCAPADSNTST Cooling tower capacity evaluation: design vs test
  • DVR Data Validation and Reconciliation
  • advDVR Advanced Data Validation and Reconciliation including gross error detection and elimation
  • BALANCE General mass/energy balance solver using GEKKO
  • PINCHMANUAL Pinch analysis (minimum utilities, pinch temperatures, composite curves, grand composite curve) and heat exchanger network design by manual tick-off heuristic
  • PINCHSOLVER Pinch analysis (minimum utilities, pinch temperatures, composite curves, grand composite curve) and heat exchanger network design by optimization solver
  • FORMULA Generic formula calculator with unit conversion and IF-THEN-ELSE
  • SOLVE Solve nonlinear equations with unknown variables using fsolve
  • ECONOMIC Economic analysis: NPV, IRR, Simple Payback, Profitability Index, EAC
  • advECONOMIC Advanced Economic analysis with inflation, depreciation, and tax: NPV, IRR, Simple Payback, Profitability Index, NCF

Badge

Connect-MCP badge for com.engscript/mcp

Markdown for your README
[![Connect-MCP](https://clawy.uk/mcp/badge/com.engscript/mcp.svg)](https://clawy.uk/mcp/s/com.engscript/mcp)