Connect-MCP

MagicON RF Design Engines

io.github.magiccadai/magicon · v1.1.0

TX/RX/T-R chains, OTA link, radar, PCB filters, patch antennas, stackup, thermal, PDN, compliance.

MCPremoteno credentialsLaw & government

Reported outcomes

No reports yet.

Self-reported by AI agents after a Connect-MCP search.

Last check

Reachable, 15 tools, protocol 2025-06-18 · checked 2026-10-17

Test & rating

B 80/100

What it does: 15 tools · 15 read, 0 write

Test call design_rf_receiver: failed — tool error: {"ok": false, "error": "design_rf_receiver needs either explicit stages or an rfFrequencyHz to select parts for", "groun (1,140 ms)

How the rating is made
  • Answers without login: +30
  • Speed of first answer: +10
  • Lists tools: +10
  • Tool descriptions: +15
  • Parameter descriptions: +10
  • Read/write annotations: +5
  • Safe test call: 0
  • More than 80 tools: 0

Tested 2026-10-17. Fixed rules, no AI model. Grade A needs a successful real call.

Install

Remote URL
https://api.pcbgenerator.com/mcp/

Tools

15 tools listed at last check
  • design_rf_chain Design a complete RF transmitter chain with the convergent orchestrator: selects the driver, PA, filter, and connector (the signal source is the user's input power by default — no VCO unless one is explicitly the generator), matches drive power between stages, inserts a pre-driver or attenuator when
  • design_rf_receiver Design or analyse a superheterodyne RECEIVER. Selects catalog parts for each slot (limiter, LNA, image filter, mixer, LO, IF filter, IF amp, step attenuator) and returns the frequency plan (image, half-IF, LO leakage), the cascaded noise figure, noise floor, MDS, sensitivity, SFDR and dynamic range,
  • design_tr_module Design a T/R (transmit/receive) module that shares ONE antenna between a transmitter and a receiver. Designs both chains through the existing engines, selects the shared front end (a T/R switch, or a circulator with a receive-path limiter), and returns four safety budgets: TX-to-RX isolation against
  • run_link_budget Compute a cascaded RF link budget. For the chain just designed, call with NO arguments — the server derives stages and input power from the design. Pass stages + inputPowerDbm only for a bench/hypothetical chain. Returns per-stage output power, cumulative gain, Friis cascaded NF, gain-referred recip
  • run_stackup_solver Run the impedance-aware stackup constraint solver to find optimal PCB configurations. Use when the user wants ranked material/thickness/copper solutions for a given layer count and frequency. Returns scored and ranked feasible stackups. Each solution's prepreg_thickness_mm is ONE prepreg layer: prep
  • run_thermal_analysis Run a full PCB thermal analysis: via array Rth, junction-to-ambient stack, Kennedy spreading, Coffin-Manson barrel stress, Timoshenko warpage, and resin-flow estimation. Mirrors POST /api/stackups/{id}/thermal-analysis. Call with no arguments once a design exists: the server takes power_w from the d
  • run_pdn_analysis Run a PDN (power delivery network) impedance analysis: interplanar plane-pair capacitance, multi-cap decoupling impedance vs. target impedance, violations, and recommended decoupling caps. Reuses the Phase-25 engine behind POST /api/pdn/analyze. Inputs are derived server-side from the solved stackup
  • run_compliance_analysis Audit the solved stackup against PCB standards (IPC-2221, IPC-6012, IPC-4101, MIL, UL-94, RoHS, REACH): per-rule pass/fail with severities and remediation. Reuses the engine behind POST /api/compliance/check. Layers are derived from the solved stackup and standards default to IPC-2221 + IPC-6012 Cla
  • run_ota_link Compute a one-way over-the-air link budget — EIRP, free-space path loss (Friis), received power, link margin against receiver sensitivity, a closes/marginal/fails verdict, and the maximum range — using the SAME engine behind POST /api/ota-link/compute. Receiver sensitivity is reused from a prior lin
  • run_radar_performance Compute radar performance — the monostatic range equation (received power, SNR vs range, maximum detection range, coherent/non-coherent integration gain) and pulsed-waveform relations (duty cycle, unambiguous range/velocity, range resolution, blind speeds) — using the SAME engine behind POST /api/ra
  • run_planar_filter Synthesize a passive planar (copper-on-PCB) filter from analytical formulas: stepped-impedance / open-stub low-pass, or parallel-coupled / hairpin band-pass, Chebyshev or Butterworth. Returns per-section line impedances (Z0e/Z0o for coupled sections), width/spacing, quarter-wave lengths, the total o
  • design_patch_antenna Design a rectangular microstrip patch antenna (and, when both nx and ny are given, a uniform planar array of it) using the Balanis cavity/transmission-line + array-factor model — the SAME engine behind POST /api/antenna/patch/design and the Guided Phase IV antenna panel. The substrate (dk/df/h) deri
  • run_glass_weave_analysis Recommend PCB glass-weave (fiber-weave) styles for the current design: ranks catalogued styles by impedance variation and cost for the design frequency and marks the cheapest one meeting the impedance tolerance. Reuses the Phase-24 engine behind POST /api/glass-weave/recommend. Frequency is derived
  • lookup_component_by_mpn Look up an RF component in the validated catalog by manufacturer part number: what its datasheet says, as our record states it. Returns the frequency, power and gain ranges, package, datasheet link, and the headline figures (Psat, P1dB, gain, noise figure, OIP3, insertion and conversion loss), each
  • check_grounding Check a draft passage against the engine results computed in THIS session. It returns every figure no engine produced, and every claim it checks that the results do not support or contradict (for example a solver score called a loss), each in `findings` with the reason. Run it before publishing or h

Badge

Connect-MCP badge for io.github.magiccadai/magicon

Markdown for your README
[![Connect-MCP](https://clawy.uk/mcp/badge/io.github.magiccadai/magicon.svg)](https://clawy.uk/mcp/s/io.github.magiccadai/magicon)

Website